Gallery, Projects and General > Member Videos

My week this week, my workshop videos!

<< < (30/63) > >>

hermetic:
Fordson E1A major, Only one video this week chaps, because we did a "poo" run on Moday afternoon, and the workshop power was off on Wednesday! I get the wheels finished in two coats of primer each, and then onto the kingpins/steering swivels. I put the extra grease slot on the RHS and then start the LHS, but find when I get the nuts off the bolts, the bolts are seized in the axle, It all makes life interesting, and I get it all in bits by Friday, and show the process of fitting the kingpins to the new bushes if you don't have the factory reamer available! (Video scheduled for release at 4pm GMT)
Phil, Warm and wet in East Yorkshire

hermetic:
Fordson Major rebuild, finishing off the steering swivels/king pins, and the track rod and drag link, and Richard turns up with my kitchen unit so I spend a couple of days fitting kitchens and plumbing! YUK. but I plough on and get it more or less finished. It will really make a difference to be able to wash the cups and fill the kettle in the same room where I make tea!
It's still warm and sunny in East Yorkshire!
Phil

hermetic:
Fordson E1A major, rebuilding the drag link, refitting the wheel;s, rebuilding the horn, and paint on Friday so it has the weekend fror drying. I also get the tea room sink plumbed in, and the worktop fixed down!
Phil, in wet and windy East Yorkshire.

hermetic:
Fordson E1A major Rebuild.  So we get more paint on, in order to fit the seat, and the radiator, and then find that despite all my efforts, new Dynamo refuses to output a single volt, even though I have polarised it and it is brand new!, then I go to change the fuel filter, and find that there isnt an element in it! Things can only get better....I hope. Still it did start and run perfectly, so cleaning the bowl out and putting a filter in it can only make it better!
Phil, in a Glorious Indian Summer in East Yorkshire

hermetic:
Fordson E1A major, Rebuild,  I get the tractor running and wash it down outside, then back in the workshop, back wheels and mudguards off, and start on the final frontier, the respray!
Phil, In warm and Atumnal East Yorkshire

Navigation

[0] Message Index

[#] Next page

[*] Previous page