The Shop > Our Shop
My workshop tour
hermetic:
Yes pekka, that was what I was going to do, I am pretty sure that the generator is working, but I don't think it has enough output to operate the bigger cut out that the tractor is fitted with, I will have one more try with it, then it will get an alternator, I have one off a Volvo that only needs a diode pack, could be the one!
PekkaNF:
Re_ Tractor not changing: engine rpm was 1/3 of car engine ....needed smaller plley than DC generator had and still would not charge on idle. Also changed the belt to cogged to work better on small pulley.
hermetic:
very good point Pekka!Q I will check on that, Thanks!
Phil
PekkaNF:
You are wellcome.
Found this old thread:
https://madmodder.net/index.php/topic,11049.msg128260.html#msg128260
Pekka
hermetic:
Very Interesting Pekka! I can see me making one of those pulleys in the nearish future! I just put up my latest video about some more in depth looks at the projects in my workshop, enjoy guys!
Phil
East Yorkshire
UK
Navigation
[0] Message Index
[*] Previous page
Go to full version