Gallery, Projects and General > Project Logs
my way to billd a stuart 10 horizontal engine
krv3000:
hi all did a bit more I made a new crank and fitted the top casting to the bottom box casting I had to make new studs as the ones supplied are to short so mad them out of stanles rod I all so put sum chemical metal on the underside of the box as the casting is thin no pics of that right pics the studs in the pics the long ones is the ones I made and the ones in the box casting
vtsteam:
Second crank looks good, Bob! :thumbup: :beer:
mechman48:
Looking good Bob; I made one similar a while back a S50H, works a treat when set up...
George.
krv3000:
hi brill im not inprest with this kit sum of the 7BA nuts are taped off center studs to short im after sum 4.5mm AF stanles hex bar to make new ones
krv3000:
hi will put up sum pics at sum point I got sum stanles rod 2.5mm will remake the studs I have sum 4.5mm AF coming to make sum bolts I got sum SS nuts of peter so I don't have to make them also borrowed the taps and die's for the gland nuts and exhorts port I mad up a angel bracket to attach the top casting to I also got a 11mm ball nose cuter off john for the Bering mounting point have fun by for gnaw
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version