Well the spare interface card including it's daughter card with (I think) 16 kb x 16 byte battery backed ram card arrived the other day from my son in Houston.
Now it was this little RAM card that had failed when I had the lightning, and although I had a spare with which the machine worked, it didn't translate error numbers into error text after it was fitted. As the file of error texts is stored in the RAM I wanted to try a second spare, hence getting this one.
Well, ominously, the lithium battery on this recent card was absolutely flat - not even millivolts - I've seen several of these cards but the batteries have always had something in them - reputedly they are good for ten years but there is no date on the battery.
As the battery had to be unsoldered anyway I thought that I might as well fit my 'remote battery' lead to it as that's the eventual configuration the I want to end up with.
OK battery transplant done, machine reloaded, but various error messages. Three more total wipes and reloads (which is quite a complicated process!) performed but with the same results.
Accepts facts Andrew, the card is dead
![:(](https://madmodder.net/Smileys/default/sad.gif)
So first replacement RAM card re-installed - a further total wipe and re-load performed and we are back running but of course still without error texts.
So I now have two (or is it three
![:scratch:](https://madmodder.net/Smileys/default/icon_scratch.gif)
) faulty RAM cards so I want to reverse engineer them for testing and repair.
They look fairly conventional with four 32k x 8 bit static Ram chips and minimal logic gluing them together and a bit for isolation of the main 5 volt rail when on battery back up.
Mind you it's all a bit small for my old eyes and will involve magnifiers !