Things are definitely looking up on the Renishaw Probe front
![:thumbup:](https://madmodder.net/Smileys/default/happy0034.gif)
No, still no word about the bits that have "gone walk about" in Australia, but an MP12 brand new probe appeared on eBay that was well out of my price bracket, but the seller had mentioned that he had tested it as working. Now as I had obtained an MP12 in a job lot of bits earlier in the year I fired off a message asking him how he was testing it, as I have no idea if mine works or not.
Turns out that he had a spare OMM (that's the receiver bit that stays fixed to the machine) - mines being kicked about by Kangaroos in the Antipodes
Discussion ensued and the grand chap let me have it at a very reasonable - far too reasonable - price and not only that let me have an OMI version which is the same as the OMM but includes the electronics of the machine interface.
To cut a long story short, the postman brought me a box this morning with the Renishaw OMM & OMI - I need to curtail my excitement as we have guests for lunch and are out tonight so I wont be able to try things until Thursday.
My MP12 doesn't look too bad, but when I got it, the AA batteries had been left in and had corroded so took some extracting - I hope that the vapours haven't travelled into the electronics. But I do also have an LT02S optical probe in unknown state so quite a bit of experimentation is needed to find what does and what doesn't work.
Renishaw have used several signalling systems for their optical probes, including different IR wavelengths to allow more than one probe system to co-exist in the same machine, so I hope I have a compatible set up - time only will tell !
I am delighted to say that Cliff, the eBay seller has joined us here on the forum as 'Brent Crude' - he is a star and my current hero - thank you Cliff
![:bow:](https://madmodder.net/Smileys/default/anim_37.gif)