Gallery, Projects and General > Project Logs |
The Artful Bodger does a 30 minute project for poor people! |
(1/4) > >> |
John Hill:
A simple bit of turning... :med: Looks better with a bit of gun blue to colour it, but what is it? :scratch: A tool height gauge for poor people who do not have quick change tool posts! Lets check it with a piece of thin steel between the tool point and a round piece, seems to be not too bad at all! :ddb: |
dsquire:
Topic: The Artful Bodger does a 30 minute project for poor people! http:// (Read 143 times) John: I have been reading over some old posts and came across this one. Myself, I think that it is a great idea. Should rank right up there with sliced bread. Its quick, its cheap, its simple, what more can a person want. 142 people have read this before me and not one has left a comment of any kind. Job well done John. Everybody should have one of these. Thanks for showing it John. Cheers :beer: Don |
chuck foster:
well i just read it and all i got to say is..............................i need to make one :thumbup: :thumbup: :dremel: :dremel: chuck :wave: |
bogstandard:
Piddling time John, sorry. That is a great idea, but unfortunately slightly out of date. As I mentioned in my post about setting centre height. http://madmodder.net/index.php?topic=1661.0 With such a lot of people now switching over to tipped tooling, this sort of toolng has now become redundant because it can't cope with the negative top rake some of these tips use. But if everything you use is positive or flat, then no problems. John |
John Hill:
Ha ha Bogs! Piddling time indeed! :lol: Mind you I did say it was for poor people and maybe they dont have tipped tooling as yet? :coffee: |
Navigation |
Message Index |
Next page |