Gallery, Projects and General > Scraping

Scraping the vertical ways on the knee fo a mill - perpendicularity!!

<< < (3/3)

Joules:
Paul, not sure if this will give you some ideas.

http://madmodder.net/index.php/topic,11658.25.html

I didn’t need to do much to make a better job of the machine than I got it.  Just take careful measurements before you start to make sure your not making things worse.  I mostly just had to get rid of tight spots and improve the bearing surface contacts to improve sliding fits.

Navigation

[0] Message Index

[*] Previous page