« previous next »
Pages: [1]   Go Down

Author Topic: Screw cutting 6 TPI through a macro lens  (Read 6372 times)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Screw cutting 6 TPI through a macro lens
« on: January 26, 2017, 11:29:55 AM »
Logged

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2532
  • Country: gb
Re: Screw cutting 6 TPI through a macro lens
« Reply #1 on: January 26, 2017, 11:52:21 AM »
Great stuff John.... :thumbup:
Did you get the mill sorted? :zap:
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Screw cutting 6 TPI through a macro lens
« Reply #2 on: January 26, 2017, 03:15:35 PM »
Changed the run cap it lives again
I want to go the 3 phase inverter rout
Be very handy for tapping
John
Logged

Offline Biggles

  • Full Member
  • ***
  • Posts: 236
  • Country: gb
Re: Screw cutting 6 TPI through a macro lens
« Reply #3 on: January 28, 2017, 04:09:42 AM »
Twastard brill John,     hope your leg is on the mend.  :dremel:
George
Logged

Offline mexican jon

  • Full Member
  • ***
  • Posts: 214
  • Country: england
Re: Screw cutting 6 TPI through a macro lens
« Reply #4 on: January 28, 2017, 05:17:40 AM »
 :mmr:
Logged
People say you only live once ! I say thank F@*K can't afford to do it twice.
Pages: [1]   Go Up
« previous next »