The Shop > CNC |
My desktop CNC router's first cuts |
<< < (3/3) |
MadModder:
The import of the breakout board schematic did not go very well. It looks ok, but whatever I do all components become black opaque squares when I try to export it to PDF or something. I found a PDF of it from 2008 though. The explaining texts are in swedish, but you'll get it anyway I suppose. The symbols are universal. :D |
MadModder:
I actually found a PDF with the schematic for the motor controller. In a mail from 2007. Yay for backups :thumbup: It's mostly taken fom the datasheet. One of these for every motor, and they plug in to J3 / J4 / J5 / J6 on the breakout board. The chip is Allegro A3979. |
MadModder:
An old photo of the first test of the boards: Breakout board under, and the motor driver modules on top. |
Biggles:
looks like something for the future, thanks for the pdfs. :thumbup: |
Manxmodder:
Thanks for showing this project. I don't have room for anything like this at present time,but I really appreciate how useful an addition a CNC router would be. Great project,well done :clap: :clap: .......OZ. |
Navigation |
Message Index |
Previous page |