| Gallery, Projects and General > Project Logs |
| Top 10 mods for Mini lathe please ? |
| << < (6/10) > >> |
| Chilliphil:
I hope you keep asking basic questions! I'm more of a newbie than you and am following this thread with great interest. Thanks to all contributors. |
| Buell:
Only when we stop learning do we loose interest in life. Had thought I would make some of these in Ali....or Am I just wasting my time and materials ? Also maybe the Engineers on here could explain the relief on the back, that goes around the shaft ? I guessed it was so that any debris that does get past the plastic doesn't get jammed between the shaft and plastic....being that it's a larger space ? That's what I thought anyway. |
| Kjelle:
Buell, check Arc' s site, they have instructions for this job there! I havn't done this conversion, but remember reading those files and thinking it can't be that hard to do this. BTW, you riding a Buell? Kjelle |
| mexican jon:
Have a look here http://www.arceurotrade.co.uk/Catalogue/Projects-Articles :thumbup: |
| John Rudd:
Buell, I did do a write up on changing the bearings on the minilathe when I did my C3, Ketan did ask if he could publish it in his website, not sure if he did...but I remember putting back the original bearing shields...... |
| Navigation |
| Message Index |
| Next page |
| Previous page |