| The Shop > Finishing |
| Airless Paint Sprayer |
| << < (2/2) |
| micktoon:
Hi Rob, I think it might be easier and just as quick to used them small size rollers with the velvet type roller, they cover good but can get into 90% of places, small brush will get the other bits but no overspray or masking off which I think you would need with any spray type method. Cheers Mick |
| Will_D:
Of course I would never recommend this technique: |
| Sid_Vicious:
Well, at least he was masking up everything he didn't wanted paint on..... :lol: :lol: |
| jcs0001:
Very good - would never have thought of this method :) John. |
| appletree:
I did mine with a standard spray gun with, the paint is too thick to atomise and does not cover if thinned enough. My solution was to pressurise the paint pot with a PRV, spray guns can be bought for less than £10 these days so a possible way. Phil |
| Navigation |
| Message Index |
| Previous page |