The Shop > Finishing |
Airless Paint Sprayer |
(1/2) > >> |
RobWilson:
Hi Lads Have any of you used a Airless Paint Sprayer ? ( emulsion/masonry paint ) I am looking for a quick lazy way to brighten up my workshop walls and was wondering if they are any good . Cheers, Rob :beer: |
awemawson:
I used one to paint the barn walls and ceiling before kitting it out as a workshop It was a big commercial Graco one like this: http://www.ebay.co.uk/itm/Graco-395-St-Airless-Sprayer-/182357307573?hash=item2a7557b0b5:g:X58AAOSwKOJYF324 Bought it on ebay, used it then sold it again on ebay (though about 5 years later!) Did the whole lot in two coats off a scaffold tower in half a day (about 1500 sq foot floor area) |
RobWilson:
Hi Andrew I was thinking more DIY than industrial :dremel: Rob |
doubleboost:
I did the walls at work with a body schults (under seal) gun It worked great with exterior grade emulsion John |
howsitwork?:
Rob I have tried an airless spray gun with emulsion but not a great success I'm afraid. Probably didn't get paint dilute enough and just got very frustrated and took it back as it did not work. :hammer: Can you not borrow a paint gun and compressor? Did my shop with a roller and standard emulsion straight onto the breeze block, worked fine. Now bought a Dulux paint pod- bloody marvelous gadget for ceilings etc. |
Navigation |
Message Index |
Next page |