Thanks Biggles
![:beer:](https://madmodder.net/Smileys/default/anim_32.gif)
First up tonight was finish off a chair for Joules
![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Workshop%20Waffle/P1140611_zpslq26xhny.jpg)
The handling is a bit wank Joules, but it's ready whenever you are.
![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
Next up my custom made from billet PVC welding screen arrived today
![:ddb:](https://madmodder.net/Smileys/default/dancenana.gif)
, This is for dust spark control.
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Workshop%20Waffle/P1140607_zpsopb9ken0.jpg)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Workshop%20Waffle/P1140605_zpsepbas7oy.jpg)
I think I may stick a few neodizzyum magnets in the eyelets down each side, mmm not sure, still pondering that one.
And the gear for my remote phase converter stop/start turned up.
Cheers Rob,
PS, Some geeza once said a picture is worth a 1000 words ,,,,,,,,,,,,,,,,,mmmmmmmmm not if your blind or you post it on Madmodder
![:)](https://madmodder.net/Smileys/default/side2side.gif)