| Gallery, Projects and General > Project Logs |
| Wilson's Workshop Waffle |
| << < (7/74) > >> |
| nrml:
--- Quote from: tom osselton on August 31, 2016, 05:35:04 PM ---Putting weight on the pump end works great. --- End quote --- I ended up cantilevering the column for the lift. The weight of the headstock end (which arrived loaded with the heavy end at the front of the vehicle) and having to have the Z axis parallel to the feet of the hoist so that it could be lowered to the floor made the moving around a bit nerve wracking. I guess weights would have made that more straight forward, but I wouldn't have had anything heavy enough even if had thought of it. |
| tom osselton:
You could use a couple buddies. :beer: |
| RobWilson:
Evening Chaps Made a wee bit space in the shop today and assembled the mill :dremel: A good clean and the electrics to re fit is all thats needed now , the old flexible conduit (ally/paper type ) is a tad crispy critter , I have some nice new 20 mm kopex conduit with flex glands that will do the job nicely . :zap: Rob |
| krv3000:
brill rob |
| tom osselton:
Looks to be a nice machine! |
| Navigation |
| Message Index |
| Next page |
| Previous page |