| Gallery, Projects and General > Project Logs |
| Wilson's Workshop Waffle |
| << < (34/74) > >> |
| Pete W.:
--- Quote from: RussellT on November 17, 2016, 06:15:58 AM ---Hi Rob What are you going to keep in that wasted space in the corner between the cupboards? :D Russell --- End quote --- |
| RussellT:
--- Quote from: RobWilson on November 17, 2016, 03:34:38 PM ---any ideas ? --- End quote --- :doh: I should have seen that coming. Here goes - it has to be something that can be accessed from the bottom or a slim space at the top. How about rags for wiping up - they could be pulled out through a suitable hole. Or a kitchen roll - or something similar but larger. Are there any liquids you use a lot - a tank for something? I have a smaller space behind shelves created by a pier on the wall and I've got an old fire extinguisher in there as an air receiver. You could probably get an old gas bottle in your space as an air receiver - with a drain on the bottom. Russell |
| DMIOM:
--- Quote from: RussellT on November 17, 2016, 05:47:05 PM ---..... Are there any liquids you use a lot - a tank for something?....... --- End quote --- Could you mount a polypin of (operator) coolant? (only to be used after the end of the working day of course) :beer: Dave |
| AdeV:
--- Quote from: RobWilson on November 17, 2016, 03:34:38 PM --- I dont know ,just live with it I suppose :palm: , any ideas ? --- End quote --- Could you stand tall bar-stock in that corner, using the cupboards as a "lean-to" to prevent them from falling over/rolling away? Welding rods maybe? |
| John Rudd:
--- Quote from: RobWilson on November 16, 2016, 05:09:11 PM ---Hi John No wonder at the price you where knocking them out at :headbang: Rob --- End quote --- Ah that was the mates rates price.... :beer: :clap: How about a small stove for those cold wintry days like today...? Brrr My feet are freezing after spending all morning at the lathe making swarf from a 6" bar...... |
| Navigation |
| Message Index |
| Next page |
| Previous page |