The Shop > Composites & Plastics |
repairing a peli case |
(1/4) > >> |
angus:
i have acquired a pelicase that has had a round hole drilled in it.... i believe they cases are made of polypropylene ? what can i glue a repair patch in with ?? have considered polyurethane adhesive an a patch held in with screws but wonder if there is anything better ... |
mexican jon:
Depending on the size of hole I would tap it and and screw a piece of threaded polypropylene rod in coated in super glue :thumbup: How big is the hole :scratch: |
Joules:
You can weld polypropylene with a soldering iron, add filler to make the weld proud then scrape it back and polish/sand to match finish. Or wear the wound as a badge of honour on your Pelicase. |
angus:
2 holes maybe 30mm diameter....did wonder about tapping them and making a plug. what kind of fool buys a waterproof expensive box then drills a hole in it for a pipe!! |
angus:
--- Quote from: Joules on August 06, 2016, 05:09:06 AM ---You can weld polypropylene with a soldering iron, add filler to make the weld proud then scrape it back and polish/sand to match finish. Or wear the wound as a badge of honour on your Pelicase. --- End quote --- would need to find a suitable bit of polyprop first...... |
Navigation |
Message Index |
Next page |