Recently I have been working on a new display driver for the CNC that would allow my modded firmware to communicate with the user. It is making progress and I am soon going to try it on the controller. I'll keep you updated ![:)](https://madmodder.net/Smileys/default/side2side.gif)
That's sounds like a Christmas gift!
Hopefully, I will finish it in time
![:scratch:](https://madmodder.net/Smileys/default/icon_scratch.gif)
The current problem is, that the screen is mapped in a strange way. Every second pixel is simply skipped. I have absolutely no clue why.
My program works fine, but something with the framebuffer or it's configuration is wrong.
If somebody want's to try it out anyways, just extract the attached zip file onto a USB disk and power-cycle the CNC with the stick in.
To revert back to normal operation, just remove the USB and power-cycle.
Also note that you need to run the mod firmware (can be identified by the "Powered by MadModder" splash screen) to try this out.
But hey, after all, it is sort of working and actually compiling
![:beer:](https://madmodder.net/Smileys/default/anim_32.gif)
![](http://i.imgur.com/8W5eeDX.png)