The Shop > CNC
DDCSV1.1 4 Axis controller
blades:
It took awhile, but I finally got my parts from China. It lives!! :ddb:
Benedikt:
:update:
Good evening,
I just wanted to post this small update since it might affect some of you too (especially those who are running a small company and have a public website).
EU GDPR laws are going into effect as of tomorrow. I made sure to change http://config.pandora-cnc.eu/ to hopefully comply with these rules (and I am thinking about taking down the rest of the site for either an undefined amount of time or until I can confirm that it passes these new laws). It's not commercial, but I since I can't tell if it does still apply, I have made sure to change it anyways. You may have to change your website too to avoid legal trouble and hefty fines.
I have removed any local storage functionality, removed the optional analytics that helped me improve the website from time to time and removed features like continuing editing or previewing the generated file. Configuration files can still be uploaded and edited online, but after submitting in some browsers, editing cannot be continued and the result can only be downloaded and previewed with a text editor. Sorry for all that!
I may, if there is demand, change the internal data flow to re-gain some of this functionality and to also provide you with a fully translated website.
Please don't hesitate to ask for more/missing functionality or for me to bring back anything that was lost in the latest update.
As many people, I have not much of a clue what these laws exactly require me to do and I am rather safe than sorry. I don't usually work much on websites, so this is not my area of expertise.
Best regards,
Benedikt
WeldingRod:
I'm trying to repeat a configuration editing job I did quite a while ago; I copied out the eng file and changed the limit on steps/mm. When I copy this file out now, I get an empty file! Any ideas?
I really need a way to allow low feed rates; right now the software won't allow anything slower than 300 mm/second WITHOUT using the FRO adjustment to slow it down further. I think I could edit the limiting range like I did on the step/mm. IF I could get the dratted file out!
These are the limiters I want to modify (per the Pandora site):
76 Default operating speed 10.0000 .. 99999.0000 mm/min
99 Operating acceleration 9.0000 .. 9999.0000 mm/s2
80 G0 speed 99.0000 .. 99999.0000 mm/min
77 Maximum speed 99.0000 .. 99999.0000 mm/min
If I could get a copy of the eng file that would solve my problem too...
Will_D:
Which version do you want?
WeldingRod:
I have 1.1 Plus, according to the home screen.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version