The Shop > CNC |
DDCSV1.1 4 Axis controller |
<< < (158/202) > >> |
dale brisson:
Benedikt M. this is my 4th or 5th board (controller) im using estlcam and the amount of things i can do is great t400 steel is no problem i just take it slow and easy . but i had my eye on the ddcsv1.1 for a year now and just bought one got it in 3 days but my big issue is my vfd cant use it with arduino uno (grbl) my mach 3 board will work with it. but now i really want the ddcsv to run it ..but i can figure out the vfd grrrrrrrrrrrrrr |
antonio:
hi I'm return with my old question. is it possible to change the homing sequency xyz instead of zxy? |
awemawson:
Homing Z first is conventional for safety reasons, getting the tool above any obstructions on the table |
antonio:
My problem is that z sensor is on below of a fixed xy position.. for this reason i ve move x and y firsth than z Inviato dal mio iPhone utilizzando Tapatalk |
dale brisson:
--- Quote from: dale brisson on December 01, 2017, 09:19:53 AM ---hello fellow members have a few question for you new to the form . i have the ddcsv1.1 and a vfd my vfd is a kinda 320 series 2.2kw i will attach the pdf for anyone to give me a hand ( thanks in advance) first question how do i hook this thing up ..IM so lost was told i have a pretty good vfd from other groups but no help with this.. also pulse per mm i know its steps my motors do 200 steps per rev my driver are set at 1600. my ball screws are 1616 ..16mm per rotation(360)degrees whats the math for this again? or the answer lol --- End quote --- |
Navigation |
Message Index |
Next page |
Previous page |