| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (154/202) > >> |
| Benedikt:
--- Quote from: Will_D on November 29, 2017, 06:12:52 AM ---Thanks Benedikt. Will Pandora instal overwrite my existing parameter settings? --- End quote --- The latest version is not overwriting the settings anymore. If you want to play safe, you can copy it from the /mnt/nand1-1/settings file to a usb stick before you start. Best regards Benedikt |
| Will_D:
Please help I am confused. The pandora loader displays a red warning on the splash screen, and loads a new version. There is no other comunication (as indicated in the seceond screen shot) The version details are: 2017-04-16-IM NOR DDCSV1.1 PLUS Problem is that it won't run a gcode file or do a zero all axes (2nd x- x-). Pendant mode works as do the single axis zero and the move/jog modes I notice in reply 731 mention of a november version which installs as: 2017-10-30-89 NOR DDCSV1.1@DDREAM This version also behaves as above. |
| hschoel:
Hello All, DDCSV2.1 is available at https://www.lollette.com/cnc-controller/DDCSV1.1-offline-CNC-Controller.html When you order the DDCSV1.1 you are getting the DDCSV2.1. I got this confirm. |
| merc:
--- Quote from: hschoel on November 30, 2017, 01:58:15 AM ---Hello All, DDCSV2.1 is available at https://www.lollette.com/cnc-controller/DDCSV1.1-offline-CNC-Controller.html When you order the DDCSV1.1 you are getting the DDCSV2.1. I got this confirm. --- End quote --- How it differs from v1.1? |
| Benedikt:
--- Quote from: merc on November 30, 2017, 05:51:41 AM --- --- Quote from: hschoel on November 30, 2017, 01:58:15 AM ---Hello All, DDCSV2.1 is available at https://www.lollette.com/cnc-controller/DDCSV1.1-offline-CNC-Controller.html When you order the DDCSV1.1 you are getting the DDCSV2.1. I got this confirm. --- End quote --- How it differs from v1.1? --- End quote --- I hope only in the wierd new design :P Also an interesting detail from the new firmware file, chris posted: --- Code: ---DDCSV2.1@DOSEDONE --- End code --- It appears as if the new firmware is going to be compatible across all controllers alike (So DDCSV1.1 and DDCSV2.1). Also it is probably going to be produced/distributed by whatever DOSEDONE is. |
| Navigation |
| Message Index |
| Next page |
| Previous page |