| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (81/202) > >> |
| awemawson:
:lol: :lol: |
| Avis:
Thank you, unknown of the existence of the label. :doh: Greetings. |
| ugv:
re bonjour est ce que quelqun pourrait m'aider , j'ai un deuxième controlleur ddcsv mais le 0-10v ne marche plus et le m3 ne marche plus aussi.savez vous quel composant faut il changer ? merci |
| Benedikt:
--- Quote from: ugv on February 19, 2017, 04:35:15 PM ---re bonjour est ce que quelqun pourrait m'aider , j'ai un deuxième controlleur ddcsv mais le 0-10v ne marche plus et le m3 ne marche plus aussi.savez vous quel composant faut il changer ? merci --- End quote --- These ports are opto isolated. You could try changing the opto-isolators inside. |
| Simon0362:
--- Quote from: Benedikt M. on February 18, 2017, 05:55:20 PM --- Hi Merlin! Fortunately, this contains so many things I have been missing and can't get to work just yet. Like drivers for the keypad, drivers for SPI, I2C and all the communication interfaces it uses to connect to the motor controller chip (huge FPGA, no documentation at all). This kit also contains all the NDA proteted code it seems and a proper datasheet. It also contains the kernel and tools to reprogram our board with a different splashscreen and kernel. So yes, the most useful thing we could do. Thank you so much! :beer: But I can't accept this offer. It's too much I think. --- End quote --- Benedikt, Brilliant work, let me know if there is anything I can help or contribute with. Looking forward to being able to take this controller to the next step with the obvious missing elements such as toolchanging support. As for the UI, I would suggest the following from a recent intensive use of the module: Single button select for the most frequently used keys: * setting Z to zero (I have a manual toolchange so require to do this every toolchange) * Goto zero, all axes * Select Machine Co-ords as part of a re-zero process * File select - default to the most recent file at the topApart from that, I wouldn't change much - IMO... BR Simon |
| Navigation |
| Message Index |
| Next page |
| Previous page |