| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (66/202) > >> |
| chriscnc:
how do you feel this controller compares to the SMC4-4-16A16B.. I know it's only 50khz vs 500khz but my machine only needs around 45khz max. so I'm more wondering motion control and look ahead, and G code compatibility. |
| BrokenEye:
This may help |
| antonio:
hi guys again. So I've another problem, this time with backlash. I put on setting anable x,y backlash and parameter of backlash x&y 0.12 also the velocity modifyed but on manual mode no difference when change the directions. it seems backlash not working. Any idea?? thx lot |
| Will_D:
When it starts to run a file we see: Syntax Check: nnn What does the nnn mean? Is it a line number or an error code? |
| Will_D:
My g-code keeps hanging up on this controller! It works fine on the SMC4-4 Can someone please post or pm me a small g-code file that works on their DD controller Note that this machine just converts g-code instructions into electrical drives for the stepper controllers so there is no need for feeds/speeds/z-axis movements. Attatched is the latest from EstlCam I have tried diffferent memory sticks to no avail. I suspect it maybe a LF/CR problem but why do some lines work? I am loosing patience with this controller - I like it because unlike the SMC one it supports a pendant that works a treat! I need to know if I have a faulty DD or what Many thanks in advance and what does the Syntax check number mean?? |
| Navigation |
| Message Index |
| Next page |
| Previous page |