| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (65/202) > >> |
| Will_D:
Ok so I used the non G91 generic fanuc script. It looks a lot better but doesn't run on my DDCSV1.1 Text file attatched Any one have any ideas.?? Thanks in advance Will |
| Merlin201314:
Which program are you using? Can you post the dxf? |
| Joules:
Will, at a guess the controller doesn't like the Nxx line numbers for starters. Heres a file of mine, compare how it is constructed. You just need to rename it .ngc It should run on your controller in simulation. |
| Merlin201314:
--- Quote from: Joules on January 19, 2017, 11:51:54 AM ---Will, at a guess the controller doesn't like the Nxx line numbers for starters. Heres a file of mine, compare how it is constructed. You just need to rename it .ngc It should run on your controller in simulation. --- End quote --- Joules, his file is full of unknown codes for the DDCSV, mine is working perfectly with the line numbers, is not that, i asked the DXF as to process it and re post again to see the difference.. My two cents :beer: |
| old Zozo:
--- Quote from: Will_D on January 19, 2017, 11:19:54 AM --- It looks a lot better but doesn't run on my DDCSV1.1 --- End quote --- Will, you need delete second line (O1002). After this codes will run, but my controller hate G02/G03. See above my post. |
| Navigation |
| Message Index |
| Next page |
| Previous page |