| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (47/202) > >> |
| Merlin201314:
I just received a message from a friend, it say that with the 4 axis software installed, even if the DRO is not showed on the display, the axis is still working :jaw: Let's give it a try!!!! :drool: |
| John Stevenson:
That Ratnmachine one in the video is the one I have. |
| Merlin201314:
Ok guys, i'm looking to build some macros for the tool change, hoping that now Benedikt can finally open the core of the program. The other shield is now this: normally in a serious controller you have a PLC which can be programmed exactly to do the job, just by calling a function, and in this case is not present i guess, unless Benedikt find out that we have one embedded and is just there sleeping, which i doubt. Or we will need a portion of the memory to store routines that can be called by the command(M6 in this case), and dedicated screen page to setup all the steps to store the tools position on the "map" Never the less, we have the TOOL OFFSET for 13 tools in the setting function, so why is there if we cannot use it'? There's something souspicious here :coffee: I strongly invite all of us to give a personal opinion, no matter if good or not, anything help at this stage if we want to build up something that really work. Regards Emanuel |
| Benedikt:
:mmr: I have been sent IDA and someone is in contact with somebody else having access to NDA info on the bootloader. What a great community! |
| Merlin201314:
--- Quote from: Benedikt M. on November 24, 2016, 05:15:35 AM --- :mmr: I have been sent IDA and someone is in contact with somebody else having access to NDA info on the bootloader. What a great community! --- End quote --- NICE!!!!! Hopefully we will do it!! Was IDA the version you need? |
| Navigation |
| Message Index |
| Next page |
| Previous page |