| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (46/202) > >> |
| Merlin201314:
If you have a close look at the video 📹, you can clearly see at some point that at the right bottom ↘ of the display under the firmware version is not saying D DREAM but RATTMOTOR, so clearly they changed the firmware, WE NEED TO FIND THE BLOODY WAY TO DO IT!!! Sent by my tapatalk |
| Benedikt:
--- Quote from: Merlin201314 on November 23, 2016, 02:39:35 AM ---If you have a close look at the video 📹, you can clearly see at some point that at the right bottom ↘ of the display under the firmware version is not saying D DREAM but RATTMOTOR, so clearly they changed the firmware, WE NEED TO FIND THE BLOODY WAY TO DO IT!!! Sent by my tapatalk --- End quote --- The only impressive thing would be if they had changed the bootlogo. Changing the text in the bottom right is easy. I did it on the custom firmware i made. |
| Merlin201314:
Heiii, welcome back!! they did indeed!! Look This is another company that use the same controller, and is changed |
| Merlin201314:
So, Benedikt, you will need IDA for doing the job? as i understand? |
| Benedikt:
--- Quote from: Merlin201314 on November 23, 2016, 03:59:29 AM ---So, Benedikt, you will need IDA for doing the job? as i understand? --- End quote --- Yes, indeed :( However if somebody could do it for me or point out a somewhat similarly featured armv5 decompiler then it could still work. |
| Navigation |
| Message Index |
| Next page |
| Previous page |