DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (43/202) > >>

Benedikt:

--- Quote from: Merlin201314 on November 19, 2016, 07:32:57 PM ---Well... As you are the bigger contributor to this project you will have the honor(or duty) to give a name to this new baby, then we can suggest smaller adjustments if you agree, what do you think about that?

Sent by my tapatalk

--- End quote ---
I am bad at naming, but some names could be:
OCNCC -> offline cnc controller (or LCNCC = Linux CNC controller)
Pandora -> as in how my CNC is called (due to the build being rather difficult and time consuming and as there always was something that went wrong)

But if you dislike them, I will think a little more about another name.

Joules:
Box Clever CNC

or

MMCNC (Mad Modder CNC)

and nice work on the software side :thumbup:

awemawson:
FLUFFY

FLexible

Unix controlled

Four Axis

FullY featured controller

Merlin201314:

--- Quote from: Merlin201314 on November 19, 2016, 07:32:57 PM ---Well... As you are the bigger contributor to this project you will have the honor(or duty) to give a name to this new baby, then we can suggest smaller adjustments if you agree, what do you think about that?

Sent by my tapatalk

--- End quote ---
Pandora is the right name for me, as in this project there's a lot of thing that will go wrong at some time, so why not?

Merlin201314:
Benedikt, i am quite happy to sacrifice my controller if you want to go for a complete different way,

Have a look at this link, is not the program, is all the dependencies in python to have a look, including the GUI toolkit "tkinter"
https://github.com/vlachoudis/bCNC
Here you have the link,
I had downloaded this program as i own 2 "smoothieboard 5 axis", and i use them for my printers "32 bit processor obviously" then i decided to buy the stand alone controller instead to install everything on a raspberry pi3
Hope that can help a bit, let me know your opinion please
Emanuel

Navigation

 Message Index

Go to full version