| Gallery, Projects and General > Project Logs |
| ot - Landy |
| << < (8/9) > >> |
| Spurry:
--- Quote from: Spurry on December 23, 2016, 10:23:04 AM ---.... would one of you happen to know the PCD of the bolts holding the viscous fan mounting. The fan itself needs a 36mm spanner. As those 'in the know' will appreciate the space to actually try and measure said PCD is somewhat limited. The model is a 2005/6 Disco 3, 2.7L. --- End quote --- Just in case anyone has the need to make a tool for holding the fan, according to my measurements the PCD of the bolts is 57.50mm. Pete |
| NormanV:
I just wanted to share this picture of my landrover. |
| awemawson:
I recognise that skyline - that's in the Falklands :ddb: |
| NormanV:
Absolutely right. On the road from Stanley to Mount Pleasant. The oil pressure light had come on. Fortunately a friend came to rescue me. |
| Chris Evans:
If any of you series Landy owners need the gearbox mainshaft nut tool I made four of them to help the guys out. Just pay for postage but I do ask for a nominal £20 returnable deposit to try and make sure they come back to help someone else. |
| Navigation |
| Message Index |
| Next page |
| Previous page |