| Gallery, Projects and General > Project Logs |
| ot - Landy |
| << < (7/9) > >> |
| Spurry:
As there are Land Rover aficionados in plentiful supply, would one of you happen to know the PCD of the bolts holding the viscous fan mounting. The fan itself needs a 36mm spanner. As those 'in the know' will appreciate the space to actually try and measure said PCD is somewhat limited. The special tool would normally be cheaper and easier to get, if it were not the Season of Goodwill, aka the Christmas holidays. The model is a 2005/6 Disco 3, 2.7L. TIA :thumbup: Pete PS It's not mine, but a neighbours job. :bugeye: |
| Buell:
My father Bought a Landrover Safari type years ago and the only thing i remember was it had this Spot light on the roof that you could turn from inside the vehicle (Im guessing for locating Big Cats !)...so when we were looking for house numbers late at night you could shine it at the House doors ! was great just looked like the police were searching for suspects in the Neighbourhood ! Good ole days. |
| Chris Evans:
I spent over 35 years with series Land Rovers around me. Great fun and always something on the to do list. |
| Andrew Wildman:
All the landy owners are coming out of the woodwork! (or should I say rust?) :beer: |
| hermetic:
Here I am in the seventies standing next to my bare chassis rebuilt landrover series2, obviously needed more brain oil! It became the recovery vehicle for my garage business, and did sterling work dragging many cars and vans out of the ditches around Langtoft, during which time the carb was replaced with a SU from an old Rover 75, which improved starting and MPG from 14mpg to about 22 mpg, but the old one leaked more than it fed to the inlet! |
| Navigation |
| Message Index |
| Next page |
| Previous page |