| Gallery, Projects and General > Project Logs |
| home made mill |
| << < (19/23) > >> |
| chipenter:
Iff you have a corser thead on the draw bar it will pull the taper in and then release by unsrewing , turn the chuck or cutter in untill friction is felt tighten the nut a turn or two , jobs a goodun . |
| Henning:
I do have one of those "undo"- caps on my Emco FB2 mill. All it really is, is a sleeve or cap over the drawbar bolt which resist the force of the screw coming up. Rather simple really. |
| krv3000:
hi its a live its a live made my take on the ejector nut 17mm c/f stanles steel drilled out to 15.3mm taped 16x1 mm by 30mm deep drilled a 7.3 hole in the top for the alan key to fit threw clocked the head in had a bit play with a block of aluminium then put the flats on the two new back lash screws then made up the two locking screws right sum pics ps any on no where I can get sum of that lovear rubber to make bed covers with |
| tom osselton:
Well done Bob your a man of many talents! :thumbup: |
| doubleboost:
Very nice Bob Wont be long until we get some video of the mill working John |
| Navigation |
| Message Index |
| Next page |
| Previous page |