| Gallery, Projects and General > Neat Stuff |
| FACE PLATE WORK HOLDING AWKWARD OBJECTS |
| << < (3/3) |
| howsitwork?:
These clamps are truly excellent however I made mine with the tightening screws more towards the top of the blocks than the ones shown so you get a downward thrust as you tighten them. This is in keeping with Mr Hall's original design- as in Model engineering workshop where I saw them. take care when tightening onto the t slots as you really can exert some force with these. Happy New year one and all! :beer: |
| ieezitin:
Dave... I really should have paid attention while photographing the blocks, there are two force blocks and they are directly opposite one another thats the only way they work. I posted this same thread on another site and everyone commented on how this set up would not hold the angle block and HSS spacer, i only threw them on the face plate for a visual... alas they are correct, these little blocks would not hold this set up and i did not intend them to hold items like these of such height. I did not make them exactly to Harrold halls print... i just was in the shop and machined on the fly as that is a normal MO for me to do, i must say (howsitwork) comment on the screw height is correct, none the less these blocks will work fine for what i need now and i am going to size the blocks up and make another set for different size work, these are a must in your tool work holding crib. God Bless..... Anthony. |
| Navigation |
| Message Index |
| Previous page |