Evening Chaps
![:wave:](https://madmodder.net/Smileys/default/wave.gif)
I thought I would mess about with anouthe Bangood project tonight
![:zap:](https://madmodder.net/Smileys/default/electricf.gif)
, I welded up the wee power supply to use with the signal generator .
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Electronics%20Projects/P1100937_zpsqa1vqdds.jpg)
Not a bad board it dose have a few SMD parts , three fairly large inductors , noting the new hot air gun could not cope with
![:thumbup:](https://madmodder.net/Smileys/default/happy0034.gif)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Electronics%20Projects/P1100939_zps0wkq5zcq.jpg)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Electronics%20Projects/P1100941_zps54nfdm4m.jpg)
The
soldering welding is not the best a my solder paste had gone off
![:(](https://madmodder.net/Smileys/default/sad.gif)
anyway I got the project up and running with only one hitch
![Doh :Doh:](https://madmodder.net/Smileys/default/Doh.gif)
, some fool soldered one of the shottky diodes arse about tit .
Which causing the board to have no minus voltage outputs ,,,,,,,,,,,,,,,,,and made the buck convertor get a tad warm
![:palm:](https://madmodder.net/Smileys/default/facepalm.gif)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Electronics%20Projects/P1100944_zps6t3vf7ds.jpg)
I must admit to enjoying troubleshooting my f45k ups
![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
and here are a few
action shots of it and the signal generator working
![:ddb:](https://madmodder.net/Smileys/default/dancenana.gif)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Electronics%20Projects/P1100948_zps2fvaogs1.jpg)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Electronics%20Projects/P1100949_zpsrsmomaky.jpg)
![](http://i1066.photobucket.com/albums/u410/RobWilson100/Electronics%20Projects/P1100950_zpshpo6cipb.jpg)
all gipping stuff lol .
Question for the more knowledgeable , the board has a 3.3v output , I would rather have a 9v out put , is there a replacement for the 1117-3,3 smd voltage regulator that I can replace with a 9v reg ?
I have had no luck finding one ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,due to not knowing what I am looking for
![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
Cheers Rob