| Gallery, Projects and General > Project Logs |
| Truck fuel pump hanger |
| << < (4/7) > >> |
| Brass_Machine:
Here was my next problem. The power connector for the fuel pump: It originally stuck through a pipe. If you look carefully, you can see the O ring that seals it. So, I cut it out, measured it and made a mount for it. Found a piece of unknown quality of aluminum and chucked it up: Then my phone started to die, so I was selective on taking pictures. Here it is finished: With the connector in place: I also made a spacer for the pump itself. No pictures while making it because again, phone was dying. So I saved the battery for when I was finished. So, here is how it stands now. Have to take care of the fuel return line and one more connection. Parts arrive tomorrow to finish up. Eric |
| jcs0001:
Very nicely done. Bye the time you are finished that module will be worth more than the truck. John. |
| RobWilson:
Nicely done Eric :thumbup: very pro looking :clap: ,,,,,,,,,,,,,about time you got your paws dirty again :dremel: Rob |
| AdeV:
That looks fantastic... I actually like the fact it's got flat sides, makes it look more professional in my opinion. Those fittings really help make it as well. Nice work! |
| awemawson:
Very nice Eric, My only concern would be if that Ty-Wrap will stand up to immersion in diesel for protracted periods. |
| Navigation |
| Message Index |
| Next page |
| Previous page |