« previous next »
Pages: [1]   Go Down

Author Topic: Hi from Perth Australia  (Read 6553 times)

Offline Edgwick one

  • Jr. Member
  • **
  • Posts: 29
  • Country: au
  • Love old machinery and getting my hands dirty
Hi from Perth Australia
« on: July 04, 2015, 11:43:01 PM »
Hi to everyone I have joined your group. I have a very early Edgwick mark one lathe which I am in the process of re painting the original colour is grey with red levers. Also a milling machine and another lathe
Logged

Offline mexican jon

  • Full Member
  • ***
  • Posts: 214
  • Country: england
Re: Hi from Perth Australia
« Reply #1 on: July 05, 2015, 12:16:51 AM »
Hello And Welcome To A Great Forum  :thumbup: :thumbup:
Logged
People say you only live once ! I say thank F@*K can't afford to do it twice.

Offline mattinker

  • Hero Member
  • *****
  • Posts: 1316
  • Country: fr
Re: Hi from Perth Australia
« Reply #2 on: July 05, 2015, 12:17:15 AM »
Hello Edgwick One,

I already replied to your first post, but  welcome!

If you have any photos of your lathe, especially the threading instruction plate, I'd love to see them.

Regards, Matthew
Logged

Offline AussieJimG

  • In Memoriam
  • Sr. Member
  • *****
  • Posts: 381
  • Country: au
Re: Hi from Perth Australia
« Reply #3 on: July 05, 2015, 06:58:05 AM »
Welcome from the other side of the country.

Jim
Logged

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2188
  • Country: gb
Re: Hi from Perth Australia
« Reply #4 on: July 05, 2015, 02:21:00 PM »
hi and welcume
Logged

Offline howsitwork?

  • Sr. Member
  • ****
  • Posts: 360
  • Country: england
Re: Hi from Perth Australia
« Reply #5 on: July 05, 2015, 05:09:39 PM »
Hello and welcome from sunny North Yorkshire UK

Well it was sunny earlier - honest it was
Logged

Offline SwarfnStuff

  • Hero Member
  • *****
  • Posts: 595
  • Country: au
Re: Hi from Perth Australia
« Reply #6 on: July 06, 2015, 02:33:19 AM »
Quote from: AussieJimG on July 05, 2015, 06:58:05 AM
Welcome from the other side of the country.

Jim
I second what Jim said and I'm down the bottom bit of this side just before you get wet, so you're welcome is covered from the Eastern side. Jim's a tad higher from memory - and possibly warmer at this time of year. This is a great place to hang out - enjoy, and above all have fun.
John B
Logged
Converting good metal into swarf sometimes ending up with something useful. ;-)

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: Hi from Perth Australia
« Reply #7 on: July 08, 2015, 04:58:33 AM »
 
   Hi
             Welcome to the forum, don't forget to post pictures of your lathe when it is finished, it sounds very interesting.

                                                        Cheers David
Logged
Pages: [1]   Go Up
« previous next »