Sumitomo F2C-A15-89 REDUCER 14MM QUILL

[Xenocide]

I've got a Sumitomo F2C-A15-89 REDUCER 14MM QUILL

Is it any use for anyone (UK only - it's heavy!).

I got it in a job lot of gear from a closing factory.

http://www.sumitomodriveeurope.com/en/motion-control-drives/fine-cyclo/

[PekkaNF]

Too bad, looks like couple of kilos only.....

Would be pretty prefect basis for my indexer project ...Cheap RT has way too much backlash and the harmonic drive I got was too small, and it was missing some bearings.

Pekka

[Xenocide]

For god sake don't give me ideas as to what to use it for i'll keep it!!

See if it's useful for anyone's machine's for it's actual use. If not it's yours if you want to pay postage. Got to be someone with a CNC mill or whatever it came off which would find it useful.

[PekkaNF]

We are here to help members wasting on all their free time on building something after all

Hope someone needs it as spare, because I would slap it on small servo or stepper, I allready have an indexer and works. I don't have a DRO or CNC, therefore "rotary indexer" would be nice to bolt on milling machine table.

Pekka

[Xenocide]

Send me a message on the 20th if nobody's got a use for it Pekka

[Joules]

That was my first thought Pekka.  I would like to do the same, am in UK but no transport, hope it works out for you 

[PekkaNF]

oooh, I hope it works works for meeeee

But, I'm not devastated if it goes to someone that really needs that kind of as a spare. Got few weeks ago about 20 or 30 kg of tools from UK for about 16 GBP, but I think consumer prices are a bit different.

Some more hardwood flooring to do even before I'm even allowed to think of hobbies. Highest orders of domestic powers.

Pekka

[Xenocide]

I've PM'd you Pekka