The Shop > Tools

That suds pump.

<< < (9/9)

philf:

--- Quote from: hopefuldave on May 27, 2015, 02:46:38 PM ---So far so good indeed! And the fastest Century on record, I sorely underestimated them :S

Using two of the Live inputs is just to give the rectifier an easier time - the current will (approximately, assuming good matching of the diodes in it) share the mains current.

Glad it seems to work, have you got the programming manual for the ACS300? I have a .pdf copy I can email if you need it...

Cheers,
Dave H. (the other one)

--- End quote ---

Hi again Dave,

I've just tried the inverter (without Variac) on a 1/2 hp motor wired star. It worked perfectly!

Next job is to rewire the drill motor to star and try it on that. It's currently driven by a 3 phase input 220v Panasonic inverter (which came out of a Japanese piece of equipment) but I couldn't find a manual for it and I can't suss the parameters. I can only run it on one pair of pulleys.

I do have a PDF of the ACS300 manual thanks.

The minimum current setting on the ACS300 is 3.1a which is higher than I need but the motor will only take as much current as it needs.

Many thanks.

Cheers

Phil.

Navigation

[0] Message Index

[*] Previous page