Hi!
First, thank you for letting me join in MadModders forum!
I bought 10 years old fairly used Einhell mini lathe. For first start nothing happens, I rotated motor by hand and it scratches.
I took off it and cleaned, now it works fine. Next problem is (maybe only pot) on control panel. Potentiometer says B4.7K, so
I think its linear 4.7KOhm pot with on/off switch.
When I turn little bit clockwise potentiometer, it cliks and lathe turns on (when all other switches has turned on), but I can't
adjust lathe motor speed on potentiometer. Is this potentiometer problem or something else in circuit board?
I find it to be hard to find exactly same pot on internet, but one I ordered from ebay, I don't know if it fits?
http://www.ebay.com/itm/161675373526?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITPlease give me any help with this lathe electronics, thank you!