| Gallery, Projects and General > Project Logs |
| Coke Forge Build |
| << < (11/53) > >> |
| Pete W.:
Rob's work is so amazing :bugeye: :bugeye: :bugeye: that I have to take a courage pill before I dare post my simple stuff! :doh: :doh: :doh: |
| vtsteam:
I second that, Pete.... :bow: :bow: :bow: :bow: |
| RobWilson:
Thanks Joe , Pete and Steve :beer: :wave: I need a valve to control the air flow , so I decided to make a butterfly valve :dremel: The valve body so far. Machined from a bit mystery steel . Setting the flat in the correct orientation with the PCD of the slots . Body done :dremel: And a couple of BRASS bushes (not to be confused with Bronzes as that's quite different :palm: ) for the spindle were machined up and pressed into the body . I Nickel plated the valve body to give it some corrosion resistances :zap: Rob |
| NeoTech:
Hmpf, i have Aciera as well.. why doesnt my bits look like that. ;D |
| RobWilson:
--- Quote from: NeoTech on February 21, 2015, 02:09:28 PM ---Hmpf, i have Aciera as well.. why doesnt my bits look like that. ;D --- End quote --- :) I am sure it works the same Neo :poke: :lol: Decided to do something different today , so I etched up some name plates to go on the forge and blower , smaller two are to go on some tooling I have made . Undecided on weather or not to add a colour infill :scratch: Rob |
| Navigation |
| Message Index |
| Next page |
| Previous page |