| Gallery, Projects and General > Project Logs |
| Coke Forge Build |
| << < (37/53) > >> |
| doubleboost:
Very nice Rob :drool: :drool: :drool: The plasma saves loads of time (and cutting discs) :doh: :doh: :doh: :doh: John |
| RobWilson:
Hi Chaps :wave: Decided to do a bit work on the forge today , welded some very old and rusty steel onto the stand for feet . and decided to cut a section of the hearth away . before . after First time I have used the yard vice , much better grinding out side , needs two mods , it's about 2" to high and it needs somewhere to hand a grinder :scratch: Rob |
| vtsteam:
Hey Rob! :wave: I need one of them outdoor vices! :thumbup: |
| Pete49:
+1 for the yard vice. Looks like another project added to the list, though it might make the top of it. Pete |
| RobWilson:
Cheers Steve and Pete :beer: A yard vice is a must :dremel: Got a tad more done today ,was going great guns up until I pulled a muscle in my back :( , so I will post this for now , first job this morning was to cut down the yard vice stand by 2" and add two bits of flat bar so that I can hang gear from them . Then another job I have been meaning to do is add a hook to the 8" grinder , this was made from a bolt . That done I could get back on with the forge , I am using up my old rusty stock on this project , this was cleaned up with the above grinder . and cut and welded into this . this being to support the hood and back panel . deciding whether to bolt or weld it to the hearth . cheers Rob |
| Navigation |
| Message Index |
| Next page |
| Previous page |