Rob Wilson popped in today with some belts and a bunch of other stuff, including break cleaner which is something i've been meaning to get for a while. Thanks Rob!
![](http://iforce.co.nz/i/sdggogdu.y2m.jpg)
The belt is a bit smaller than the pulleys i'd made, but that gives me a chance to make some better pulleys out of aluminium.
So I got about 20 seconds into cutting off a chunk of aluminium with a dull hacksaw blade and decided to try clear the garage a bit instead.
![](http://iforce.co.nz/i/edczk5rl.ek5.jpg)
I got the bike hung up in this corner. Doesn't give me alot of room for the step ladders. I suppose i'll try sort them out when one inevitably gets knocked down.
With the bike out the way, I could get into the corner by the doors and clear that up. It's still a bit messy but it's one hell of an improvement.
![](http://iforce.co.nz/i/u1le32oo.to4.jpg)
![](http://iforce.co.nz/i/tmnxnqqt.wn2.jpg)
The next corner to tackle will be this one on the other end. Also looking at this photo, I found my missing funnel. It was camouflaged in front of the red box..
![](http://iforce.co.nz/i/spyj2uqp.v1v.jpg)
Then I need to sort out my basket of hardwood. It's difficult getting into this corner to sweep the dust up with it and the site lamp in the way. Hopefully better lights on the ceiling will remove the need to use that lamp when filming.
![](http://iforce.co.nz/i/thg2hn4z.u1e.jpg)
I think tomorrow I'll try relocating the big ladder to the roof. With that off the wall I can then start working on finishing the dust collector.
The drum sander is close to completion but I want to have dust collection working before I start running it.