Gallery, Projects and General > Project Logs
Poppin Engine build.
<< < (9/15) > >>
Stilldrillin:
Ian.
If you don't tell us. We'll never know about your, "good enoughs".  :thumbup:

You're doing a great job. Progressing well......  :clap:

David D
SwarfnStuff:
"(very slightly isn't really an Engineering  term is it?)" Oh I don't know? It fits right in there with, "a whisker, a smidgeon, (aka smidge) and a tiny bit".   :lol:  Depends on the accuracy really needed for the job in hand.
John B,
 p.s. I guess i shall have to look at reply with quote.
ian_in_the_midlands:
Weekend spend sawing/drilling/filing.
(Note to myself - find space in garage for milling machine and buy one!)

I decided I would follow the plans and put the radiuses in.
I still have some more filing and polishing to do. I also need to cut the slots for the crank and tap the holes for the screws that clamp the bearings.

Some pictures of the progress:
Stilldrillin:

--- Quote from: ian_in_the_midlands on January 04, 2015, 03:27:16 PM ---Weekend spend sawing/drilling/filing.
(Note to myself - find space in garage for milling machine and buy one!)
--- End quote ---

Ian.

You know it makes sense........  :D


--- Quote from: ian_in_the_midlands on January 04, 2015, 03:27:16 PM ---Some pictures of the progress:

--- End quote ---

Nice!  :clap: :clap:

That's a lot more progress, than I've managed. Since before Christmas Eve.  :palm:

The most comforting thought..... The hardest part, is behind you now. Mebbe!  :thumbup:

David D
awemawson:
Oh dear . . now you are HOOKED  :ddb:

Yes you NEED that milling machine, after all EVERYONE needs a milling machine, but that's just the start, next it'll be a shaper or some other machine, then before you know it it'll be an extension on the back of the garage  :lol:

It's an addiction - I should know I'm addicted  :bugeye: :bugeye: :bugeye:
Navigation
Message Index
Next page
Previous page

Go to full version