« previous next »
Pages: [1]   Go Down

Author Topic: Drill Depth Stop  (Read 8228 times)

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Drill Depth Stop
« on: April 10, 2009, 02:27:17 PM »
Hi Madmodders

My Startright drill has an adjustable depth stop the only problem is that it doesn't stay put it moves, the solution loc-nuts



Into the old scrap box for some stub ends of steel, into the three jaw chuck turn the dia and nurl , drill:- starting with centre drill, then 8mm, then 12mm then 14.2 mm then tap M16 then part off to length.










Job Done  :thumbup:

This will make the drill a far more usefull and accurate bit of kit.

Cheers

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5536
  • Country: us
Re: Drill Depth Stop
« Reply #1 on: April 10, 2009, 03:09:32 PM »
Cool Stew...

Nice job.  :borg:


Eric
Logged
Science is fun.

We're all mad here. I'm mad. You're mad.

bogstandard

  • Guest
Re: Drill Depth Stop
« Reply #2 on: April 10, 2009, 03:51:44 PM »
Good one Stew,

Quickie job fixes problem. :ddb: :ddb:


Bogs
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Drill Depth Stop
« Reply #3 on: April 10, 2009, 03:56:10 PM »
Thanks chaps

I'm trying to get some of those little niggly little jobes done before I start back on the loco, I've got a bad habit of getting fully absorbed with one objective and putting other jobs off and making do with their shortcommings:- thats just me.

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Drill Depth Stop
« Reply #4 on: April 10, 2009, 04:44:15 PM »
It's nice when you can make these bits init  :thumbup:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline shoey51

  • Full Member
  • ***
  • Posts: 214
Re: Drill Depth Stop
« Reply #5 on: April 10, 2009, 05:09:15 PM »
nice job there simple easy fix.

now thats what I need a box full of offcuts before I retire :)
Logged
Pages: [1]   Go Up
« previous next »