With everyone posting shop photos, I figured I was due to share mine, sooner or later. I just finished up the DRO installation on my SX3 mill so I took a few shots, while things were semi clean and in somewhat order.
I'm working in a two car garage so space is tight. Tool boxes are in abundance and the place wouldn't work at all without them. Luckily, the mill table just fits the space between two of the boxes, allowing the drawers to open even when the table extends in front of them.The SX3 and the C4 lathe take up every available inch of counter space on one wall while the mini lathe and mini mill take up most of another. I keep thinking I'll put the smaller machines on Craigslist, but I'm still dragging my feet, trying to decide if I really want to get rid of them.
![](http://cedesign.net/steam/images/misc/shop/machine-wall.jpg)
![](http://cedesign.net/steam/images/misc/shop/machine-wall-b.jpg)
![](http://cedesign.net/steam/images/misc/shop/c-4.jpg)
![](http://cedesign.net/steam/images/misc/shop/x-3-dros.jpg)
The place just keeps evolving, but I'm pretty much out of room so adding much of anything else to the fray isn't in the plan right now. Enjoy the photos.... the place won't be that clean again until cold winter moves back in.
Steve