Author Topic: Mod your Old Toolmakers Clamps  (Read 5786 times)

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Mod your Old Toolmakers Clamps
« on: February 02, 2013, 05:13:26 AM »
Re cycle you old tool makers clamps to make these finger clamps, or make up from odds and ends.               

                                  Cheers David

Offline lockstocknbarrel

  • Jr. Member
  • **
  • Posts: 32
  • Country: nz
Re: Mod your Old Toolmakers Clamps
« Reply #1 on: February 02, 2013, 04:03:19 PM »
Thanks David,

This sort of modification is the reason for visiting this site. :nrocks:

Regards Beagles
Kindest Regards
Beagles............
Dave Weir

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Mod your Old Toolmakers Clamps
« Reply #2 on: February 03, 2013, 04:20:33 AM »
Very well Modded!  :thumbup:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Henning

  • Full Member
  • ***
  • Posts: 136
  • Country: no
  • All the kit and no clue!
Re: Mod your Old Toolmakers Clamps
« Reply #3 on: February 03, 2013, 02:40:43 PM »
This site has to many great ideas, my todo- list is getting way, WAY to long!

 :mmr:
Henning

Just because i can't, doesn't mean i shouldn't?
Tool- lover, with a collection to show for it!

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2893
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: Mod your Old Toolmakers Clamps
« Reply #4 on: February 03, 2013, 02:44:31 PM »
Wow...fantastic!

Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: Mod your Old Toolmakers Clamps
« Reply #5 on: February 03, 2013, 04:42:28 PM »
 Thanks for sharing  :thumbup:, Another item where soon as you see it you think of time you could have used it ..... anotherone on the to do list  :palm:

  Cheeres Mick

Offline DavidA

  • Hero Member
  • *****
  • Posts: 1219
  • Country: gb
Re: Mod your Old Toolmakers Clamps
« Reply #6 on: February 03, 2013, 04:51:16 PM »
Like the clamps.
But I really want to know how he made the replica sardine tin in the top right of the picture.

Dave. :D

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Mod your Old Toolmakers Clamps
« Reply #7 on: February 03, 2013, 08:57:43 PM »
Like the clamps.
But I really want to know how he made the replica sardine tin in the top right of the picture.

Dave. :D

Maybe it's not a replica. Maybe it is the real McKoy.  :D :D

Cheers  :beer:

Don
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: Mod your Old Toolmakers Clamps
« Reply #8 on: February 12, 2013, 07:50:42 AM »
Hi Guys,
                    Thanks for your comments and interest, I have been using these for years and have found them indispensable.

                                                                             Cheers David

Rob.Wilson

  • Guest
Re: Mod your Old Toolmakers Clamps
« Reply #9 on: February 12, 2013, 01:38:46 PM »
Well you think your getting through the to do list , then as soon as one job is done another replaces it  :palm: cheers David   :coffee:


Rob