« previous next »
Pages: [1]   Go Down

Author Topic: OKMO RETROL 1/4 Scale Lister D Engine with some Mods.  (Read 232 times)

Offline Jim Dobson

  • Full Member
  • ***
  • Posts: 195
OKMO RETROL 1/4 Scale Lister D Engine with some Mods.
« on: June 14, 2026, 11:51:42 PM »
OKMO RETROL 1/4 Scale Lister D Engine with some Mods.
I'm so thoroughly enjoying the Lister D and doing some small mods to it.
It's such a reliable engine, this hobbed nonslip drive pulley is going to work out terrific for running accessories from it, which I'm really looking forward to.

Logged

Offline Jim Dobson

  • Full Member
  • ***
  • Posts: 195
Re: OKMO RETROL 1/4 Scale Lister D Engine with some Mods.
« Reply #1 on: June 15, 2026, 11:41:57 PM »
The method of using a tap in the chuck of the lathe and the pulley on post for hobbing works really well. I made this brass pulley up this morning and hobbed it.

  [ You are not allowed to view this attachment ]  

  [ You are not allowed to view this attachment ]  

  [ You are not allowed to view this attachment ]  

  [ You are not allowed to view this attachment ]  
Logged
Pages: [1]   Go Up
« previous next »