Author Topic: The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)  (Read 1306898 times)

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2563
Re: The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
« Reply #1400 on: November 18, 2026, 10:51:57 AM »
Does that ring gear coming out help? Held by a number of cap head bolts...?
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 9150
  • East Sussex, UK
Re: The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
« Reply #1401 on: November 18, 2026, 01:27:22 PM »
I suspect that the bearing behind it is what?s trapping it - more archaeology tomorrow hopefully will reveal all!
Andrew Mawson
East Sussex

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2563
Re: The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
« Reply #1402 on: November 18, 2026, 01:44:04 PM »
That bearing will no doubt put up a fight on its removal?. :Doh:   Looking forward to the next chapter installment? :beer:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline tom osselton

  • Hero Member
  • *****
  • Posts: 1311
Re: The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
« Reply #1403 on: November 18, 2026, 02:08:44 PM »
 :beer:still lurking and watching

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 9150
  • East Sussex, UK
Re: The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
« Reply #1404 on: Today at 08:00:46 AM »
So I started this morning intending to remove the front curvic coupling and see what lies behind it. This unit must have had a hard life - one of the bolts was sheered off.

  [ You are not allowed to view this attachment ]  

Having removed them the coupling didn't want to budge - looks like there are some locating dowels that it's held on by. Rather than get too involved I decided to see if the hydraulic cylinder arrangement intended for 2500 psi would move at all on 100 psi shop air. Yes a nice satisfying click as it shot forward, but more of a dull thud when sent the other way. It was then STUCK  :bang: Soft drifts and big hammers were to no avail so I rigged up a co-axial puller using M12 all thread and a big fat washer custom made on the CNC Plasma Table. It freed of without much drama.

  [ You are not allowed to view this attachment ]  

Going off to have a re-think I consoled myself  with 'retail therapy' - I sent my rented BOC argon cylinder back years ago as the charges were stupid - I had intended to get a 'rent free' Adams Gas set up but never got round to it. 20L cylinder and brand new regulator ordered - I must investigate 'pea shooters' for Argon.

I'd originally used the Argon to de-gas aluminium in my oil fired furnace but don't now need to with the induction furnace, however I do have an ancient wall mounted 150 amp AC/DC transformer based TIG welder that I used to use - does it still work? I've no idea but now that I'll have the Argon at least I can try it - if I buy a replacement the gas is still needed.

. . .off to find about Argon pea shooters !
Andrew Mawson
East Sussex


Offline Muzzerboy

  • Full Member
  • ***
  • Posts: 147
    • The Mighty Shiz
Re: The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
« Reply #1406 on: Today at 05:38:04 PM »
Are you aware of BOC's "Hobby Welder Deal" pricing for Y size cylinders? For argon Pureshield it's currently ?62+vat per year. Depending on your usage, it may be better value than the "rent free" deals, as the refill cost (?73.50+vat) is generally lower. Argoshield Light (93% argon, 5% carbon dioxide and 2% oxygen) is the same rental but ?56+vat for refill.

Y size is 20 litre ie 4.72m3 of argon at 230bar.

Note that Air Products no longer supply non-commercial customers, allegedly for safety reasons (asphyxiant etc) but I suspect it's because they consider them to be not worth the hassle. BOC on the other hand have recognised that there is a large population of Y cylinders that aren't used by industry, so why not have them collecting dust in amateur workshops, getting paid, rather than scrap them or clog up their depots.

For my laser welder, I'm planning to go with SGS Gases 20L nitrogen rent free initially. They also do a 30L for not much more but they aren't stocked in branches by default and are quite a beast.