Author Topic: What Paint for Farm Signs?  (Read 19585 times)

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8981
  • Country: gb
  • East Sussex, UK
What Paint for Farm Signs?
« on: March 08, 2017, 04:33:35 AM »
I've cut a pair of farm signs for either side of our farm gateway. They are 9 mm mild steel - two parts, a backing, and the lettering that will be raised off the backing 25 mm by delrin pillars and held together by M6 stainless hardware. They will each be fitted to a pair of standard scaffold tube set vertically in the manner of urban road name signs.

The background will be white, and the lettering black.

As these will be placed in my verge at the side of a busy trunk road they take a bit of blasting from muck and grit as lorries go past.

My first thought was to have them hot dip galvanised before painting, but I suspect that the zinc will web across the gaps in the lettering.

Then I thought perhaps electro-zinc plated, but can't find a local place to do it.

So back to paint - perhaps a heavy zinc rich primer followed by an epoxy - but I've never used the stuff, so I would really welcome suggestions from the knowledgeable members.

BTW these weigh A LOT so sending them afar is not easy - that's a metre rule below one of them.
Andrew Mawson
East Sussex

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2529
  • Country: gb
Re: What Paint for Farm Signs?
« Reply #1 on: March 08, 2017, 04:46:23 AM »
Andrew,
What about 2 pack based paint? Isnt there a car body repairers nearby that could flash over your signs with a bit of paint? Or what about a commercial vehicle builders using coach paint? That is fairly hard wearing and durable....

Alternatively, Hammerite?
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8981
  • Country: gb
  • East Sussex, UK
Re: What Paint for Farm Signs?
« Reply #2 on: March 08, 2017, 05:11:30 AM »
Good thinking John, I'll make some calls  :thumbup:
Andrew Mawson
East Sussex

Offline MetalMagus

  • Jr. Member
  • **
  • Posts: 43
  • Country: gb
Re: What Paint for Farm Signs?
« Reply #3 on: March 08, 2017, 07:21:39 AM »
Try talking with Craig at Buzzweld. He has some gloss black finishes and rust preventing primers that get used on the underside of vehicles.

Can be sprayed, brushed, rollered, or comes in aerosols.

www.buzzweld.co.uk

Cheers

Sean


Offline j1312v

  • Jr. Member
  • **
  • Posts: 44
Re: What Paint for Farm Signs?
« Reply #4 on: March 08, 2017, 09:15:38 AM »
I have a quick glance at the subject first and I though you were asking  "what paint for farm pigs?"  :lol:

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8981
  • Country: gb
  • East Sussex, UK
Re: What Paint for Farm Signs?
« Reply #5 on: March 08, 2017, 11:17:16 AM »
Apple sauce colour obviously !
Andrew Mawson
East Sussex

Offline hermetic

  • Hero Member
  • *****
  • Posts: 795
  • Country: england
Re: What Paint for Farm Signs?
« Reply #6 on: March 08, 2017, 03:21:44 PM »
 How about Hot dip galv, and or powder coating, outside in all weathers, and dust and grit blasting followed by rain and then more dust and grit is going to tear up rough on ordinary paint, lovely sign!
Man who says it cannot be done should not disturb man doing it! https://www.youtube.com/user/philhermetic/videos?

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Re: What Paint for Farm Signs?
« Reply #7 on: March 08, 2017, 05:37:29 PM »
As John Rudd suggested Hammerite would be a good alternative to apoxy,a few years ago we needed to stretch one of our hgv's by adding a 4 ft section of chassis.welded ,blasted .no primer .2 coats of smooth finish black hammerite ,that vehicle has now done over 200.000 k and not a spot of rust through the  paint,pity we didn't paint the rest of the chassis as its all rusted to hell now. :doh:
Peter w 

Offline sparky961

  • Hero Member
  • *****
  • Posts: 844
  • Country: ca
Re: What Paint for Farm Signs?
« Reply #8 on: March 08, 2017, 09:44:55 PM »
Lots of people around here pay a lot for that "antique, rusted look".  Just clean it and shine it up and apply some salt water when the weather is mild to moderate.  Apparently this does the job evenly and quickly.

No matter what coating you put on, eventually the base metal will start to rust and will bleed through or the coating will flake off, or both.  If you go with a coating, it's only a matter of time.

Offline mattinker

  • Hero Member
  • *****
  • Posts: 1316
  • Country: fr
Re: What Paint for Farm Signs?
« Reply #9 on: March 09, 2017, 12:49:25 AM »
Hi Andrew,

If you really want it to last, glaze or have it glazed, a large potters kiln should be sufficient! Lots of really permanent colours.

All the best, Matthew.

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8981
  • Country: gb
  • East Sussex, UK
Re: What Paint for Farm Signs?
« Reply #10 on: March 09, 2017, 05:21:50 AM »
Well a big step forwards this morning  :thumbup:

I rang a chap who has done car bodywork for me in the past, and it turns out that he has previously worked at a place not too far away that grit blasts and hot zinc sprays. So I've received a very reasonable price for the blasting / zinc spraying (mates rates!) from his previous employer, and the painting he will do in two pack on the premises of the blaster so that the zinc is still fresh.

He's just been and collected them - so progress  :clap:
Andrew Mawson
East Sussex

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2529
  • Country: gb
Re: What Paint for Farm Signs?
« Reply #11 on: March 09, 2017, 05:56:38 AM »
So on its return and once erected, it should be easy to spot your place when I come with my caravan..... :lol: :lol:

Good to hear that your local resources are interested in helping you..... A lot of the places here in Hull just aren't....makes getting things done difficult...  :(
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8981
  • Country: gb
  • East Sussex, UK
Re: What Paint for Farm Signs?
« Reply #12 on: March 09, 2017, 07:37:47 AM »
John, you the family and the caravan would be most welcome. When things dry up a bit later in the year so you can get on a field, I have even equipped four points with water and electricity as friends and family do the same. If out of season wetness wise there is always room in one of the farm yards to keep you out of the claggy stuff  :clap:
Andrew Mawson
East Sussex

Offline Joules

  • Hero Member
  • *****
  • Posts: 1276
  • Country: gb
Re: What Paint for Farm Signs?
« Reply #13 on: March 09, 2017, 10:26:21 AM »
Just tell him to over inflate his tyres... :thumbup:
Honour your mentors, and pay it forward.

Offline mattinker

  • Hero Member
  • *****
  • Posts: 1316
  • Country: fr
Re: What Paint for Farm Signs?
« Reply #14 on: March 10, 2017, 05:55:41 AM »
Hi Andrew,

If you really want it to last, glaze or have it glazed, a large potters kiln should be sufficient! Lots of really permanent colours.

All the best, Matthew.

Hi Andrew,
I think I was to cryptic in my post, I know it's no longer relevant, but I was thinking about the enamelled signs that were actually glazed steel plates, before all the modern finishes! They were glazed on both sides so that they wouldn't warp.
Anyway, it doesn't matter, you got a paint solution!

All the best, Matthew
PS, Warco still underway! Stumbling blocks slowing me down!

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8981
  • Country: gb
  • East Sussex, UK
Re: What Paint for Farm Signs?
« Reply #15 on: March 28, 2017, 07:32:34 AM »
At long last the signs are not only painted but erected  :clap:

The fellow was supposed to be taking them to be hot zinc sprayed, then painting them in 2K black and white and delivering them back to me. Well they got zinced ok, but he ended up using my welding shop for the painting and was a right menace - hardly 'turnkey' but after a few false starts, and three days of mucking about with paint, I eventually got him off site  :bang:

So this morning I judged that all was hard enough to handle, and assembled them and planted them in the ground. Ended up having to use the forklift truck to get them to site - they are amazingly heavy and too wide to go in the tailgate of my Discovery, as I had hoped. Anyway they are in, and bedded with 'dry mix' which I have subsequently watered.

It'll be interesting to see how long before they appear on Google Streetview !
Andrew Mawson
East Sussex

Offline Spurry

  • Sr. Member
  • ****
  • Posts: 346
  • Country: england
  • Norfolk, UK
Re: What Paint for Farm Signs?
« Reply #16 on: March 28, 2017, 07:44:53 AM »
They've turned out very well, Andrew. Spot the pig. :)
Pete

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2529
  • Country: gb
Re: What Paint for Farm Signs?
« Reply #17 on: March 28, 2017, 08:08:16 AM »
Looks very good Andrew  :thumbup:

eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline seadog

  • Full Member
  • ***
  • Posts: 223
  • Country: gb
  • NE London
Re: What Paint for Farm Signs?
« Reply #18 on: March 28, 2017, 09:15:07 AM »
Very nice job as always Andrew.

Offline spuddevans

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1618
  • Country: 00
  • Portadown, Northern Ireland
    • My Photo website
Re: What Paint for Farm Signs?
« Reply #19 on: March 28, 2017, 12:53:29 PM »
Looking very nice Andrew  :thumbup: :thumbup:

Tim
Measure with a micrometer, mark with chalk, cut with an axe  -  MI0TME

Offline NormanV

  • Hero Member
  • *****
  • Posts: 629
  • Country: gb
  • United Kingdom
Re: What Paint for Farm Signs?
« Reply #20 on: March 28, 2017, 02:13:15 PM »
They are excellent. Could you make me one saying "Lazy Bastard" for my house? :)

Offline DICKEYBIRD

  • Full Member
  • ***
  • Posts: 229
  • Country: us
  • Collierville, TN ya'll
Re: What Paint for Farm Signs?
« Reply #21 on: March 28, 2017, 02:27:33 PM »
They are excellent. Could you make me one saying "Lazy Bastard" for my house? :)
You guys that live close to John Stevenson's Bridgeport Specialties® can drop by & get your free Clumsy Bastard signs.  They're only 20 quid apiece. :lol:
Milton in Tennesee

"Accuracy is the sum total of your compensating mistakes."