Author Topic: Melting crankshafts  (Read 8448 times)

Offline ironman

  • Full Member
  • ***
  • Posts: 157
  • Country: au
Melting crankshafts
« on: January 24, 2016, 06:41:07 PM »
Hi everyone

I was running low on scrap cast iron so I dismantled some lawnmower engines. The crankshafts were melted for the castings I needed, have a look at the video to see how it turned out. 
« Last Edit: May 24, 2022, 09:08:17 PM by vtsteam »

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8981
  • Country: gb
  • East Sussex, UK
Re: Melting crankshafts
« Reply #1 on: January 25, 2016, 03:19:23 AM »
Ironman, your videos are always informative and interesting, and this one is no exception. Thank you for sharing. :thumbup:
Andrew Mawson
East Sussex

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
  • Country: at
Re: Melting crankshafts
« Reply #2 on: January 25, 2016, 06:39:23 AM »
Nice. It really helps to have someone post videos of how to do thing properly.You really have perfect process control. Really impressed that there is no porosity at all.

This was green sand wasn't it? Do you measure sand moisture level, or have the experience to just do it be feel? Roughly what oil flow rate were you running?

Regards,
Mark
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline NormanV

  • Hero Member
  • *****
  • Posts: 629
  • Country: gb
  • United Kingdom
Re: Melting crankshafts
« Reply #3 on: January 25, 2016, 12:07:14 PM »
I've done a lot of aluminium casting but from watching this video I can see that I have a lot to learn. Very informative, thanks.

Offline DavidA

  • Hero Member
  • *****
  • Posts: 1219
  • Country: gb
Re: Melting crankshafts
« Reply #4 on: January 25, 2016, 12:41:53 PM »
That slo-mo of the liquid metal splattering on the floor should be a clear warning to those who you see pouring while wearing shorts and sandals. Don't do it.

Dave.

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2895
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: Melting crankshafts
« Reply #5 on: January 25, 2016, 04:56:54 PM »
Cracking video! Thanks for sharing,

Offline ironman

  • Full Member
  • ***
  • Posts: 157
  • Country: au
Re: Melting crankshafts
« Reply #6 on: January 26, 2016, 06:21:07 PM »
Mark This is green sand and I use a liter container to measure how much water to put in the sand.

Offline ironman

  • Full Member
  • ***
  • Posts: 157
  • Country: au
Re: Melting crankshafts
« Reply #7 on: January 27, 2016, 09:53:02 PM »
Mark I forgot to answer your other question, the oil flow rate is 13.73 litres per hour.

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
  • Country: at
Re: Melting crankshafts
« Reply #8 on: January 28, 2016, 05:45:00 AM »
Thanks.
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline Toolshed

  • Jr. Member
  • **
  • Posts: 86
  • Country: us
Re: Melting crankshafts
« Reply #9 on: May 04, 2016, 10:02:50 PM »
ONE OF THESE DAYS. IRON!!!!  :-)  I'm just doing aluminum at this point....
No matter where you go....There you are....

Metalworker
Woodworker
Metal Caster

Google Map of members.  Send me your city/state/country and I will get you added in!
https://www.google.com/maps/d/edit?mid=1yzP6dM2C2yeti0msljLA5Ny_pwQ