« previous next »
Pages: [1]   Go Down

Author Topic: Bit of info please  (Read 3014 times)

Offline kayz1

  • Full Member
  • ***
  • Posts: 114
Bit of info please
« on: November 27, 2013, 07:58:29 PM »
Hi all, Christmas has arrived early, i ordered a DRO kit for the Myford S7 and it arrived today, i only rang on Monday afternoon :bugeye:
Any way the point is this...i only have metric nuts bolts screws, taps drills and stuff so...the Myford has a row of tapped holes in the rear of the bed can some body please tell me what size/thread they are..

 Many thanks.. PS: i have not yet had the guts to try and cut a thread...i will one day.
  Lyn.
Logged

lordedmond

  • Guest
Re: Bit of info please
« Reply #1 on: November 28, 2013, 03:03:59 AM »
1/4  BSF or 5/16 BSF

the back ones are 1/4 BSF
the more modern ones use metric to bolt down the headstock



as a rule all the fixings are BSF and the oil nipples are 2 BA  as are some of the smaller screws on the compound


Stuart
Logged

Offline kayz1

  • Full Member
  • ***
  • Posts: 114
Re: Bit of info please
« Reply #2 on: November 28, 2013, 12:37:28 PM »
Many thanks Stuart, will order some cap heads now and get stuck in.
 Lyn.
Logged
Pages: [1]   Go Up
« previous next »