Well I guess since I just tried it and it is working again, you could say a new from old. Or a micro wave is reborn
I went to heat up my coffee this morning as the carafe only keeps it lukewarm as the level drops. I put it in the nuker and nada, zip nutting.
upon looking over the deal it appears that the latch mechanism, stopped working. Now it could be the fuse they don't talk about. Which is underside of the outer skin. They also generally have a two language instruction that if the fuse blows you should replace the micro switches that are the primary and secondary interlocks.
Well the latch bar on the door two hooks that ride on the inside part of safety set up no longer had any tension on it.
Which means a broken plastic spring retaining hook!
Popped the inner door bezel trim ring off, removed the rest of the broken plastic mount, used Tech bond plastic adhesive to reconnect the crack door edge. Found a good length screw and 3 nuts and a washer.
Outside of door.
Drilled a slightly undersized hole and threaded the screw in making sure the washer was on the outside of the door, as in the first photo. Then reinstalled the latch bar, hooked the spring over the screw and placed a nut and lock nut on.
Tried it and it latched properly, reskinned it,put the bezel trim ring on heated up the coffee. Will be painting the screw head and washer black as soon as the paint markers warm up some. Worked great, now I can save the money towards the trading tables at the NAMES expo in 2 weeks
So that's my save of the week!
