« previous next »
Pages: [1]   Go Down

Author Topic: Sheet metal bending tool - not brake  (Read 7700 times)

Offline picclock

  • Hero Member
  • *****
  • Posts: 613
Sheet metal bending tool - not brake
« on: April 17, 2021, 03:55:27 AM »
Saw this on youtube :

https://www.youtube.com/watch?v=hyW8-NU4-lc&t=1s

Has anyone made something similar ? 

It appears useful for very long bends and allows multiple bends and returns. Only minor snag I can see is it has to follow the edge of the sheet.

Thought I might crib the idea and make a DIY version, as I have some bends to make just over a metre long.

Any thoughts much appreciated.

Best Regards

picclock


Logged
Engaged in the art of turning large pieces of useful material into ever smaller pieces of (s)crap. (Ferndown, Dorset)

Offline BillTodd

  • Hero Member
  • *****
  • Posts: 1188
  • Colchester Essex (where the lathes were made)
Re: Sheet metal bending tool - not brake
« Reply #1 on: April 17, 2021, 04:22:41 AM »
Probably fine for bending thin zink for roofing etc. But those long bending-axles are not going to provide much clamping force , which will result in some large radius bend and probably variable radius too.

Maybe a lot of work to make one for little return .
Logged
Bill

Offline picclock

  • Hero Member
  • *****
  • Posts: 613
Re: Sheet metal bending tool - not brake
« Reply #2 on: April 17, 2021, 06:15:44 AM »
This is the simpler version. It would very useful for multiple edge bends, which are all but impossible with a brake.
I would only make it good for 4" depth or so as I doubt I would need more.
Best Regards
picclock
Logged
Engaged in the art of turning large pieces of useful material into ever smaller pieces of (s)crap. (Ferndown, Dorset)

Offline BillTodd

  • Hero Member
  • *****
  • Posts: 1188
  • Colchester Essex (where the lathes were made)
Re: Sheet metal bending tool - not brake
« Reply #3 on: April 17, 2021, 09:55:18 AM »
Yes thats probably simple enough to build and test .
Logged
Bill

Offline picclock

  • Hero Member
  • *****
  • Posts: 613
Re: Sheet metal bending tool - not brake
« Reply #4 on: April 18, 2021, 04:43:49 AM »
Different video with quite good results, skip 6-8 mins unless you want to  learn how to paint.
Same idea but only two bending rollers. 
https://www.youtube.com/watch?v=XO_8y8LrRRI&t=95s

picclock
Logged
Engaged in the art of turning large pieces of useful material into ever smaller pieces of (s)crap. (Ferndown, Dorset)

Offline mattinker

  • Hero Member
  • *****
  • Posts: 1317
Re: Sheet metal bending tool - not brake
« Reply #5 on: April 18, 2021, 08:28:57 AM »
A variation on a bead roller?
Logged
Pages: [1]   Go Up
« previous next »